Saturday, March 19, 2011

A Toaster in My Toaster

Got a package in the mail a couple of weeks ago that I wasn’t expecting and inside was a wonderful old toaster for Island Girl from Pam’s sister.  It’s perfect!!  Thanks, Barb.
P3190772
P3190774
As you can also see, the laminate for the countertops is going in.  Had our caregiver today and I didn’t want Pam with me when I did the stinky gluing, so it was a good day for it.  Ran out of time with one piece still to go, but that’s OK.
The entry for the bathroom has been an ongoing project, laminating the upper and lower parts, one piece of Baltic birch at a time.
P3140749
P3140748
It’s not much different than the original, just a smaller opening and more curves, but I’m happy with the way it looks.
P3140757
And the old vanity with its curved top is morphing into the new computer station.  That curve was a tough one.
-steve

Saturday, March 12, 2011

Rain and Wind

It seems like we’ve had rain and wind nonstop for a month.  I know it’s really not that bad, but it seems like it.  The boat has been heeled over in the wind and gloomy and dark down below.  Pam continues to slowly get worse and I still try to get her off the boat for awhile each day, but it’s a big effort getting her on and off as she just about can’t walk anymore.  If you know anything about sailboats, think bosun’s chair.  So, this morning, even though I had our caregiver coming to give me a break, I was dark and down and gloomy and depressed, mostly from the weather.

As far as trailer work goes, things are pretty good.  Having to work slowly and deliberately as I’m in one of those stages where it’s easy to make stupid mistakes and I have little patience for myself on that stuff.  But, it’s almost magical the way the trailer is coming together after all this time.  So many things I’ve thought about and planned for during the last two years are actually in the trailer now and they mostly look and work like I wanted.  That’s way cool.

Outside, I’ve got the louvered panel for the fridge air intake installed.  Louvered panel came from Fergie's Custom Louvers and I used the Vintage Style Drip Caps from VTS.  Fergie’s louver polished up nice and easy, but Steve’s drip cap was a pain.  I knew it came white and need to be stripped, but it didn’t strip—even Aircraft Paint Remover didn’t touch the finish.  Only sanding got it down to bare aluminum and it was a lot of work.  It was also too long but that was expected and an easy fix.

P3050734

P3070735

P3080737

I used nutplates and machine screws to fasten the louvered panel after making up some C channel to reinforce the huge hole I cut in the trailer.

Chris, Aluminium Idler, put up a post in his blog about using a torch to heat and bend his door back into shape.  I used the same technique after his inspiration to put a huge bend in a straight piece of trim for the bathroom entry sill.

P2280733

Today I worked on the upper piece to that bathroom door and on the curved top for the former vanity cabinet just forward of the bathroom.

P3120738

P3120739

P3120740

That little cabinet top has a really sharp curve on it and I could not get the usual 1/8” Baltic Birch to make the bend no matter what I tried.  I ended up using a couple pieces of 1/16” Aircraft Birch laminated together to get it done.

But back to the wind and rain. . . I worked about half the day on those two projects above and decided to spend the afternoon sitting and reading in front of the fire in the heater.  I’m parked in a storage lot which doesn’t sound very pretty, but Island Girl is in the back on the grass with lots of trees around and a couple of eagles often overhead.  The trailer doesn’t heel in the wind like the boat and the rain sounds really soothing on the aluminum.  And nine Caravanner windows are much better than tiny portholes.  My gloom was pretty well gone.

-steve