Friday, April 23, 2010

A Piece of Steel Wool

Back in October I had sent a letter to Lopez Island to the address of someone whose last name was the same as the original owner of my trailer.  Doubted there’d be any connection, but figured it was worth the cost of a stamp to try.  I pretty well forgot about it, but a few weeks later I got a letter from the original owner.  She said her husband had died some years earlier, but that she was 92 and that she’d get some information together for me.  Exciting stuff!  A few weeks later I got a call from her son, Harold, who was in high school when the trailer was new.  He promised to get together with his mom and get back to me saying, “it may be awhile, but I’ll definitely get back to you before you get the trailer back on the road.”

And he did, emailing me about a week ago with some great info and stories about the trailer.  We exchanged a few emails that night, he’s read this blog, and we’ll stay in touch for sure.  As we get closer to Island Girl being finished, we’ll take a ferry ride out to Lopez and see if his mom approves of what I’ve done to her trailer.

Island Girl’s first owners had been tent campers who had friends who owned an Airstream and they decided they just had to have one too.  They took an empty two pound coffee can, soldered the lid back on, and cut a slot in what they now referred to as the “half buck box”.  Whenever either of them received a fifty cent piece in change, they’d save it and drop it in the box.  Most of the money for the Airstream was saved that way and in 1957 the box was heavy enough to justify a trip to the factory to purchase a brand new Bubble.  They got a deal, though, and drove home with a big, shiny, brand new Caravanner.  Harold tells me he can still remember the “new car smell” inside the new Airstream.  Their lot was small and the trailer would only fit in their garden next to their home in suburban Chicago.

Their first tow vehicle was the first new car they’d purchased, a 1951 Pontiac Catalina with a straight eight and a Hydramatic tranny.  It pulled the trailer pretty well, but Harold reported that they sometimes needed to run the heater on full blast at the top of long climbs to keep the coolant temps down.  I’ve done that a few times myself, but not in a ‘51 Pontiac.  In ‘59, they bought a new International Travelall that had a six cylinder with a three speed transmission with overdrive.  That first year that they had the trailer, 1957, they did the first of several trips from Chicago to Lopez, here in Washington’s San Juan Islands.  In ‘58, there was a trip to Nova Scotia and the New England states.  ‘59 began the towing duties for the Travelall with another trip to Lopez.  Minnesota and Michigan were the destinations in 1961 and in ‘62 they returned once again to Lopez and also to the Seattle World’s Fair.  A Florida trip was in 1963 and ‘64 saw a one way trip to Lopez with a garage being built for her there around 1970.  The trailer was used as a home on the island while a new house was built there.  From around that time period until just a few years ago, it likely never left Lopez.

Around 1999 it was sold to someone who lived on San Juan Island, but had property on Lopez, where they set up the Airstream.  They almost certainly never moved the trailer until selling it to the family I purchased it from, who moved it only the very short ferry ride between the two islands.

And the piece of steel wool?  Harold was called by his parents in the early 90’s to figure out how mice had gotten into the trailer.  He found the only likely entry around the freshwater tank drain and filled the gap with a piece of stainless steel wool.  I clearly remember removing that piece of steel wool when I dropped the bellypan.

-steve

Tuesday, April 20, 2010

Island Girl Has a Ceiling Raising Party

When I had the three big interior panels polished, I brought them inside the trailer and started to rivet them together.  Buck riveted as far as I could reach by myself and clecoed the rest.  Charlene was here for six hours today to watch Pam and I recruited some of my friends from the marina to help get what would be one large panel flipped over, lifted, and installed.  My buddy Jim, who has bucked way more rivets at Boeing than I ever could on this trailer, shot the rest of the rivets while I bucked.

P4170386

Just as we finished, John, Tom, and Karen arrived and, with the help of a couple of 2x4 T’s and some clamps, we were ready to flip the panel and lift it into position for clecos.

4200392A

P4200394

We pushed and pulled for an hour or so and then clecos started lining up with holes at the back end.  Pretty soon the panel was pop riveted back up.  Big big difference in the way the trailer looks on the inside and it’s really satisfying to start getting some projects done.

P4200395

Nice to have a great bunch of friends too.  Really good day.

Meanwhile, back here on the boat, Pamela has decided to be compulsive about where my mouse sits on the mouse pad (for some reason, she has decided that it must always be in the middle).  Windows sends me back to the desktop every time Pam touches the mouse, so I’ll admit defeat and wrap this post up.

Sunday, April 11, 2010

A New Jack

Boy, they really knew how to build them in the 50’s!!

In the fall when we moved from the shady but soon to be muddy spot to the drier location for the wet winter, our original tongue jack failed.  I got a replacement quickly, but cold and wet soon set in and that job was put off in favor of the inside jobs I did during the winter.

I had all day to work on the trailer today and the temperature hit 60 for the first time this year, so it was a good day to tackle the jack.  As it turned out, I needed nearly all day as the old one was a bugger to get out.

It was fastened with 4 3/8” steel rivets.  I ground off the heads hoping I could then drive the rest through, but no go.  I drilled them out, but it still wouldn’t budge.  I then attacked the thing with my trusty old Makita grinder and a couple hours later, just as the grinder went up in smoke, the jack finally gave up and came out.

P4110381

The new one slid right in and fastened with grade 8 bolts.  Nice to see the trailer sitting on a jack instead of all blocked up like it’s been.

P4110380

I was sure I’d stripped the Zolatone from both of the upper interior panels that will hopefully go back in this week.  I was sure but I was wrong.  One panel needed stripping and it’s the usual fight trying to get the Zolatone off.  This picture is after three coats of stripper.  Clearly more to go.

P4110379

Got an email from the son of the original owners of Island Girl when I got home from the “jackfest” and that really made my day.  Lots of info about the trailer and it’s tow vehicles that I’ll be going through tonight.  She went from Chicago to the Seattle World’s Fair!

Sunday, April 4, 2010

The Endcap is Done

I thought I was done day before yesterday, but wasn’t happy with the shape of the last panel.  Recut and refinished those two panels and put them up today.

P4030372

P4040374

Pam has her two teddy bears in her hand in that shot and that’s a definite sign that she’s ready to call it a day and head back to the boat.  The Tundra has a pretty decent sound system and she just loves to go back to the 60’s and listen to the Byrds on the trip back home.  Turn, Turn, Turn.

P4040378

I’m happy with the way it looks and can’t wait (but I will) to see what it looks like with all the upper skins in place, polished aluminum in back and birch in the front.  Getting the aluminum back up is the next phase.  I have a new center piece still to be cut out and possibly some more stripping of old zolatone to do before the panels go up.